Note: We recommend that installation is undertaken by a competent plumber or heating engineer. When mounting, do make sure that the surface onto which the radiator is fixed will provide a secure location for fixings.
Geo Horizontal Installation Guide
The valve position can only be located on the right hand side of the radiator
Mark out plug positions on the wall, drill and place the bolts in leaving a 5mm space for the Geo to be mounted.
Take off top grille that is pre-fitted.
Connect the Geo flexi pipes to the supply, ensuring that the flow is connected to the Thermostatic Valve.
Please Note: The supply Flow & Return must be within 430mm of the right hand (valve) side of the Geo.
Fig 4 & 5,
Hang the Geo to the wall by slotting the brackets over.
Tighten the Geo by using a 10mm spanner from the top and below.
Fig 7, 8a, 8b & 9,
Replace top grille using a 3mm Alan key. (This grille can be replaced after venting).
Remove top grille.
Use a flathead screwdriver to release the vent plug. Re-tighten once all the air has been expelled.
Replace top grille.